
Window Tint in Huntsville, AL
Computer-cut carbon and ceramic film installed indoors, with a lifetime film warranty and legal shades confirmed before we cut.
Film is only as good as the install
Indoor bays, plotted patterns and a shop that has built its reputation on 450+ five-star reviews.
STEK & GeoShield
Lifetime film
Computer cut


99%
UV rejected
$199
Carbon starting at
1 day
Typical install
2021
Serving Huntsville since
Multi-layer film, cut to your glass
Automotive window film is a thin multi-layer laminate bonded to the inside of your glass. The layers do the work: a UV blocker, a colour-stable carbon or ceramic core that handles heat and glare, and a scratch-resistant hard coat facing the cabin.
We install nano-carbon M1 and ceramic M2 film. Neither contains metal, so nothing interferes with GPS, keyless entry or cell signal. Patterns are plotted per vehicle rather than hand-cut on the glass, which is why the edges sit tight to the gasket.
Installs run indoors at 564 Blake Bottom Rd, Suite 31, so airborne dust never gets a chance to land between film and glass.



Why drivers here tint
Heat, glare and interior fade are the three reasons north Alabama books tint.
A cabin that cools down
Ceramic film rejects infrared before it enters the glass, so a car parked on Blake Bottom Rd in August is livable in minutes rather than miles.
99% UV blocked
The same UV that fades dashboards and cracks leather also ages skin on a long commute. Film cuts it at the window.
Real glare control
Low winter sun on I-565 and oncoming headlights at night both get knocked down, which makes long drives less fatiguing.
Interior preservation
Tinted glass slows the fade-and-crack cycle on dash plastics, door cards and seats — the parts that make an older interior look old.
Zero signal interference
Both films are metal-free, so GPS, keyless entry, phone reception and toll transponders behave exactly as they did before.
Lifetime film warranty
Bubbling, peeling, purpling and delamination are covered for as long as you own the vehicle.
How the install runs
Choose your shade
We walk through legal limits, the look you want and how much heat rejection you actually need before anything is cut.
Glass prep
Every window is stripped of old film if needed, then cleaned and squeaked clean — contamination under film is permanent.
Computer-cut install
Patterns are plotted to your exact year, make and model, then heat-shrunk and installed indoors to keep dust out.
Cure and inspect
We inspect every edge under light, then give you the cure window before rolling windows down.
Window tint packages
Starting prices vary with vehicle glass count and old film removal.

M1 Carbon
From $199
Front two, rears or full vehicle
Nano-carbon film with a flat, non-reflective black finish. The right pick when appearance and glare control matter most.
- Nano-carbon construction, no metal layers
- Colour-stable — will not purple or fade
- Strong glare and UV reduction
- Computer-cut patterns for your exact vehicle
- Lifetime film warranty

M2 Ceramic
From $299
Front two, rears or full vehicle
Multi-layer ceramic film with substantially higher infrared heat rejection — the package most Alabama drivers end up on.
- Everything in M1 Carbon
- High infrared heat rejection
- Cooler cabin and faster A/C recovery
- Total signal clarity for GPS and phones
- Lifetime film warranty

Windshield & Strip
Get a Quote
Add-on to any package
Full clear-ceramic windshield film or a sun strip along the top edge, sized and legal-checked for your vehicle.
- Clear ceramic windshield film option
- Sun visor strip
- Blocks heat without changing visibility
- Cut to the windshield's exact curve
- Pairs with any tint package

Alabama legal shade check, every time
Front side windows, rear side windows and the back glass are each held to different light-transmission limits, and factory privacy glass changes the math on SUVs and trucks. We measure the glass you already have, then tell you which shades keep the vehicle compliant.
That conversation happens before a single pattern is plotted — so nobody pays twice to have film pulled back off.
Recent tint installs








What Huntsville drivers say
“Brian and Taylor did a phenomenal job. The attention to detail was unreal — the car looked better than the day we bought it and they walked us through exactly how to keep it that way.”
Window tint questions
How dark can I legally go in Alabama?
Alabama sets minimum light transmission limits that differ between front side windows, rear side windows and the back glass. We go through the legal shades for your specific vehicle before we cut anything.
What is the difference between carbon and ceramic?
Carbon (M1) gives you the flat black look, UV blocking and glare control. Ceramic (M2) adds significantly higher infrared heat rejection, which is what you feel on your arm at a stoplight in July.
How long does tint take to install?
A typical full-vehicle install is a same-day job. Old film removal adds time, since baked-on adhesive has to come off cleanly before new film goes on.
When can I roll my windows down?
Leave them up for the cure period we give you at pickup. Rolling early can shift film that has not fully bonded at the edges.
Will the tint turn purple?
No. Purpling happens with cheap dyed film. Both films we install are colour-stable constructions and are warrantied against it.
Can you tint a windshield?
Yes — clear ceramic windshield film cuts heat without visibly darkening the glass, and we also install sun strips along the top edge.
Get your tint quote
Send us your vehicle and we'll price carbon and ceramic side by side. Or call (256) 919-2024.